| Part No | Produsent | Applikasjon |
|---|
| MAX423EPD | MaximIC | +-15V chopper stabilized operational amplifier. |
| MAX4274AKEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 4, 1+ (Rf/Dg) noninverting gain 5, -3dB BW 970kHz. |
| MAX7401EPA | MaximIC | 8-th-order, lowpass, bessel, switched-capacitor filter. Single-supply operation +5V |
| OP07CJ | MaximIC | Low offset voltage operational amplifier. |
| MAX6807US26-T | MaximIC | Voltage detector. Reset output active-high, push-pull. Threshold reset 2.6V |
| MX7543J/D | MaximIC | CMOS serial input 12 bit DAC. Error +1 LSB. |
| MAX4125ESA | MaximIC | Single, wide-bandwidth, low-power, single-supply Rail-to-Rail I/O op amp. BW 25MHz. |
| MAX381ESE | MaximIC | Precision, low-voltage analog switch. |
| MAX6309UK47D3-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.583(min),4.818(max) Nominal timeout period 140ms. |
| MAX4623ESE | MaximIC | Low on-resistance 3om(typ), 5om(max), dual, DBST, NO analog switch. |
| MAX146AEPP | MaximIC | +2.7 V, low-power, 8-channel, serial 12-bit ADC. INL(LSB) +-1/2. |
| MAX339EPE | MaximIC | Dual 4-channel, low-leakage, CMOS analog multiplexer. |
| MAX4593CPE | MaximIC | High-speed, single-supply 12V, quad, SPST analog switches (two NO and two NC switches). |
| MAX237ERG | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX223EWI | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| REF01CSA | MaximIC | +10V precisioon voltage reference. Max TEMPCO 65ppm/degC. Initial error +-100mV |
| MAX6347UR39-T | MaximIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 3.900V. Order increment 10k |
| MAX640MJA | MaximIC | 3.3V or adjustable, high-efficiency, current-limiting PFM control scheme, step-down DC-DC converter. |
| MAX3226ECAE | MaximIC | +-15kV ESD-protected, 1microA, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus. |
| MAX1740EUB | MaximIC | SIM/smart card level translator. |
| MAX830CWE | MaximIC | Adjuistable output, 1A, step-down, PWM, switch-mode DC-DC regulator. |
| MAX148BCAP | MaximIC | +2.7V to +5.25V, low-power, 8-channel, serial 10-bit ADC. INL(LSB) +-1. |
| MAX6316MUK34BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX541BESA | MaximIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-2 |
| MAX6357LTUT-T | MaximIC | Triple-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.63V (Vcc5) and 3.08V (Vcc3). Active-low push-pull reset 3V. |
| MX7845KN | MaximIC | Complete, 12-bit multiplying DAC. 4-quadrant multiplication. |
| MAX333ACUP | MaximIC | Precision, quad, SPDT, CMOS analog switch. |
| MAX4075BLESA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 60V/V, noninverting gain 61V/V, -3dB BW 66kHz. |
| DG405CJ | MaximIC | Improved, dual, DPST, NO, high-speed analog switch. |
| MAX5351BEUA | MaximIC | Low-power, 13-bit voltage-output DAC with serial interface. INL (LSB) +-2. +3.3V single-supply operation. |
